CHILLER CW5200 MAINTENANCE / Daniel

THE INTERNAL CLEANING OF THE CHILLER CW5200

In the following link you can watch the maintenance video of the CW5200 chiller

https://youtu.be/Hlj4s7kGX08

 

To clean the chiller, follow the following steps:

Step 1

Remove the screws from the side covers of the chiller and with the help of a brush remove the dust residue from the cover and then secure it with the screws

Step 2

Remove the screws to release the protective mesh from the Fan and with the brush remove the residue and finish with a wipe,

then secure the mesh with the screw, repeat the process for the other fan

Step 3

 Remove all the screws from the sides of the chiller and from the top as well as the cover, remove the cover upwards

Step 4

 With the help of the brush and a cloth, clean the inside of the chiller.

Step 5

Replace the cover and secure it by replacing the screws, also replace the tank cover.

Video link of the internal cleaning of the chiller CW5200

https://youtu.be/Hlj4s7kGX08

• Related Articles

• Issue with the chiller´s alarm, Test the alarm cable / Daniel

  INTRODUCTION When there is a connection problem between the chiller alarm and the machine, the machine cuts but without power to the tube since the high voltage source is disabled.   In the chiller the flow alarm and output ports In order to ...

• Cleaning the mirrors on a CO2 laser engraving and cutting machine / Daniel

  In the following video you can watch the procedure of changing or cleaning the mirror of a CO2 machine https://www.youtube.com/watch?v=pxIulxX5udA   To clean the mirrors of a CO2 machine, follow these steps:   Step 1 Identify the safety ring that ...

• Mantenimiento del CHILLER CW5200 / Daniel

  LIMPIEZA INTERNA DEL CHILLER CW5200 En el siguiente enlace se puede mirar el video del mantenimiento  del chiller CW5200 https://youtu.be/Hlj4s7kGX08   Para hacer la limpieza del chiller se debe seguir los siguientes pasos: Paso 1 Retire los ...

• Simple Troubleshooting Chiller C5000 - CW5200 / Daniel

  SIMPLE TROUBLESHOOTING FOR CHILLER CW5000 SERIES

• Procedure to Restore Factory Setting for the Chiller CW5200 / Daniel

  One of the problems that  the chiller emits  beeps  can be that the water is not circulating through the tube but that the water passage is obstructed, Please check that the inlet and outlet hoses are not bent,  If still beeps another problem is the ...