CWFL 3000 Chiller connections / Engineer David

CWFL 3000 Chiller connections / Engineer David

1. Get distilled water or half and half of the distilled water and antifreeze green if the temperatures on the site are under 40 F. Check the quantity with the label of the chiller.
2. The electrical connection needs to be like this: 


As you can see in the picture, there is one phase, one neutral, and one ground. The chiller showing  in the picture works with 220v

 
The alarm has two wires, one 0v that goes to the common port (COM) and the signal alarm wire that goes to the normally open port (NO)


3. For the hydraulic connections
Remember to connect like this:
Outlet - Inlet 
Inlet - Outlet
For the fiber laser you have two things to connect, the machine and the laser resonator. For both cases is mandatory to connect like In-Outlet and Outlet-Inlet 

 

Fiber Laser Department

    • Related Articles

    • CWFL 4000 Chiller Connections / Engineer David

      1. Get distilled water or half and half of the distilled water and antifreeze green if the temperatures on the site are under 40 F. Check the quantity with the label of the chiller. 2. The electrical connection needs to be like this:  As you can see ...

    • Conexiones de Chiller CWFL 3000 / Engineer David

      1. Aliste agua destilada o una mezcla de agua destilada y refrigerante color verde si las temperaturas del sitio son menores a 40 F. Verifique la cantidad de acuerdo al tipo de chiller.  2. Realice las conexiones electricas y de señal de la siguiente ...

    • Conexiones Chiller CWFL 4000 / Engineer David

      1. Aliste agua destilada o una mezcla de agua destilada y refrigerante color verde si las temperaturas del sitio son menores a 40 F. Verifique la cantidad de acuerdo al tipo de chiller.  2. Realice las conexiones electricas y de señal de la siguiente ...

    • Space Saver Electric Connections / Engineer David

      This simple diagram will help you to understand how to make the connections for the electric and power part for the machine: Fiber Laser Department

    • FLY 3015 Electric connections / Engineer David

      This simple diagram will help you to understand how to make the connections for the electric and power part for the machine: If you have to install the dust collector ask for help Fiber Laser Department