IPG Laser Generator 2.0kW connections to the machine / Juan David

IPG Laser Generator 2.0kW connections to the machine / Juan David

IPG Laser Generator 2.0kW, this laser generator has two cables: Interlock and Interface

 

The Interface Cable is a 25 Pin connector with the following schematic:

 

Interlock cable is a 12 pin connector, which both of them (Interface and Interlock) needs to be connected to the machine in the following schematic:

 

 

 

    • Related Articles

    • IPG resonator connections to BCL3766 - Fiber Laser / Engineer David

      For the IPG you will have two wire groups to connect to the machine. The first one is the power wire and the second one is the communication. 1. Connect the power cable in the breaker inside the machine: The three phases to the breaker and the ground ...

    • Space Saver Electric Connections / Engineer David

      This simple diagram will help you to understand how to make the connections for the electric and power part for the machine: Fiber Laser Department

    • FLY 3015 Electric connections / Engineer David

      This simple diagram will help you to understand how to make the connections for the electric and power part for the machine: If you have to install the dust collector ask for help Fiber Laser Department

    • Raycus 1.5kW connections to the machine / Juan David

      The connections between the laser generator Raycus 1.5kW     This Laser Generator has these two cables:     It has two cables the Interface and AC Power supply, which needs to be connected:   1.     Interface: In this cable, needs to connect two ...

    • Interface Connection IPG Laser Source (3.0kW – 6.0kW) / Juan David

      Interface Connection IPG Laser Source (3.0kW – 6.0kW) The following are the instruction to connect and make the interface cable for data communication between IPG Laser Source to the machine: 1. From Main Board in OUT 5 (NO) make a wire cable to pin ...