Sengfeng Main Control Panel / Juan David

Sengfeng Main Control Panel / Juan David

Senfeng Main Machine control panel

 

Senfeng machines has a main control panel which allows to control the machine with emergency stop, servo switch, electrical switch.

 

 

This switch needs to be connected with the following instructions:

1.     Emergency Stop connect wire No. 11

2.     Electric Switch connect wire No. 8

 

3.     Servo Enable connect wire No. 36 and No. 1

 

 

 

    • Related Articles

    • Remote Control Fiber Laser / Engineer David

      Start: Start the process  Pause: Pause the process Dry cut: It is to make a physical simulation. The machine is going to make all the cutting process without laser and gas. Stop: In case of emergy to stop the process.  Blow: Test the gas pressures.  ...

    • Como manejar el control remoto de la Fibra Laser? / Engineer David

      Start: Comenzar el proceso de corte. Pause: Pausar el proceso de corte. Dry cut: La maquina realizara una simulacion fisica, es decir va a realizar un recorrido de corte sin laser y sin gas.  Stop: En caso de emergencia, parar el corte.  Blow: Probar ...

    • How to modify the files of the machine by means of RDworks? / Daniel

      To manage the files that are stored in the memory of the operation panel with the RDWORKS software, follow the next steps       1.  Open the RDworks program and connect the machine's USB cable to the USB computer port, by default the “Work” menu is ...

    • ¿Cómo cargar los parámetros de fábrica de panel de operación Ruida RDC6442? / Daniel

      CARGAR PARAMETROS DE FABRICA O POR DEFECTO RUIDA RDC6442   Para cargar la configuración por defecto desde el panel de operación siga estos pasos:      1.  presiona la tecla Z/U       2.  Con las flechas de dirección muévase y  seleccione la opción ...

    • Interface Connection IPG 1.5 / Juan David

      Interface Connection IPG Laser Source (1.5kW – 2.0kW)   The following are the instruction to connect and make the interface cable for interface (25 pin) cable and interlock (12 pin) between IPG Laser Source to the machine:     Interface (25 pin)   ...