Space Saver Electric Connections / Engineer David

This simple diagram will help you to understand how to make the connections for the electric and power part for the machine:

Fiber Laser Department

• Related Articles

• FLY 3015 Electric connections / Engineer David

  This simple diagram will help you to understand how to make the connections for the electric and power part for the machine: If you have to install the dust collector ask for help Fiber Laser Department

• Faster Guide to install a Space Saver - Fiber Laser / Engineer David

  1st Day 1. Take off the holders that hold the gantry 2. Install the computer 3. Make the levelation  4. Change the Laserhead driver if it´s necessary.  5. Put the arms inside the resonator cabinet and place it on the machine  6. Put the white arms on ...

• Belt's installation on Space Saver / Engineer David

  1. Take off the following pieces of the box: 2. Put the belt inside the machine according to the gears.    3. Take off these two pieces and put both ends of the belts on it:    4. Tight the tensor screw: 5. Connect the belt to the front door.  Fiber ...

• Instalacion de las correas de las puertas en la Space Saver / Engineer David

  1. Prepare las piezas necesarias para la instalacion: 2. Coloque las correas adentro de la maquina justo debajo de los engranajes.    3. Retire las siguientes dos piezas y utilicelas para empalmar ambos lados de la correa:    4. Apiete el tornillo ...

• Precitec - Laserhead water connections video / Engineer David

  Here is the following video that shows how to connect the water hoses to the precitec laserhead.  https://www.dropbox.com/s/ogp7dihtj4ijpa1/20201210_102702.mp4?dl=0 Remember that the Black hose that says "Side Blowing" is for the assistant air to ...