UV printer IP configuration / Stefhany
UV printer IP configuration
Step 1: Right-click on the computer's network icon, then click the "Open network & Internet settings" box.
Step 2: Press Ethernet and click on the "Change adapter options" box.
Step 3: Right click on Ethernet 2 and press “Properties”.
Step 4: Locate the option “Internet Protocol Version 4 (TCP / IPv4)”, double click, enter the following values and press “OK”:
Related Articles
Chiller and UV generator installation / Stefhany
CHILLER AND UV GENERATOR INSTALLATION Step 1: Remove the cables located inside the printer and cut the tie that holds them. Step 2: Connect the silicone hoses to the rear connectors of the Chiller, one in "Outlet" and one in "Inlet". Step 3: The ...BCS100 IP address configuration / Daniel - David
When the Fiber Laser has a problem " network time out" and the BCS100 is not working, that is because the IP address is lost Follow This steps to solve the problem Step 1 - Get machine online. Go to network property to find out at least two network ...Configuración IP impresora UV / Stefhany
Configuración IP impresora UV Paso 1: Haga clic derecho en el icono de red del computador, luego presione la casilla “Open network & Internet settings”. Paso 2: Presione Ethernet y haga clic en la casilla “Change adapter options”. Paso 3: Haga clic ...UV printer origin point configuration / Stefhany
ORIGIN POINT CONFIGURATION IN THE IMAXCAN SOFTWARE. Step 1: Make a black square in the RIPrint software, and place it on the white area, Image 1. Image 1. Step 2: Press “Print” and “Print” in the window, image 2. | Image 2 Step 3: Save the file and ...Common troubleshooting UV Printer / Stefhany
COMMON TROUBLESHOOTING AND ANALYSIS UV PRINTER Nozzle The check appears with empty spaces -Clean the heads by purging -Increase the value of negative pressure 0.5 -Modify the temperature values Nozzle It only expels air and the ink does not reach the ...