What are the technical specifications of the air compressor?

What are the technical specifications of the air compressor?

  1. The case is made of high-quality ZL 102 aluminium alloy, with a streamlined design to make heat
    dissipation more effective. 
  2. The unit is driven by an electrical magnetic motor, which adopts straight-line reciprocal motion to produce air within its structure. 
  3. The ACO-328 adopts SF3 new type wearable materials for the cylinder and piston, which have a low power consumption, greater air output and high air pressure. 
  4. The unit has a non-oil lubricating design, and the compressed air is purified.






    • Related Articles

    • 3 - Easy CO2 Auxiliary Equipment connection / Daniel

      To connect the auxiliary equipment of a CO2 machine follow the next videos Exhaust fan connection https://youtu.be/5rzzkRV7fWA?list=PLXWt--vtyu_xh-fNWXevHN537tsZUN3LP compressor connection ...

    • How to change the language on the Air Compressor / Engineer David

      1. Press the button "Move Down" 2. Move to the second option and Press "Enter" 3. Press "Move down" untill see this option on the screen, then press "Enter" 4. Then, you have to write the password "0903" to change the language using the arrows to set ...

    • Dust collector Air conections to the Fly Machine / Engineer David

      As you can see in the picture, there are 7 outlets and 7 inlets.  From left to the right (1 to 6 outlets and outlet cylinder) connect the outlets on the top.  From left to the right (1 to 6 inlets and inlet cylinder) connect the inlets on the bottom ...

    • Gas Pressures for the operation of a Fiber Laser / Engineer David

      Nitrogen 280psi Max Oxygen 120psi Shop air (assistant air) 120psi For the flow rate: Nitrogen 250CFM if you are cutting half inch of stainless steel using a 5.0 nozzle. 20CFM for the thinner sheets.  Oxygen 20CFM Max Fiber Laser Department

    • NEGATIVE PRESSURE INSTABILITY / Stefhany y Luis

      NEGATIVE PRESSURE INSTABILITY (FREQUENT BEATING AMPLITUDE IS GREATER THAN 0.5KPA)  1. Check for any air leaks in all hoses of the negative pressure system. 2. Check if the peristaltic pump is rotating. 3. If the negative pressure fluctuates up and ...