White ink alarm deactivation / Stefhany
WHITE INK ALARM DEACTIVATION
The printer generates an alarm due to the circulation of the white color, by default this alarm is activated every minute, therefore it is necessary to increase the activation time interval.
Step 1: Enter factory mode.
Step 2: Select the "Ink supply" box and increase the values by 30 in the boxes: "White ink stirring interval time", "White ink cycle interval", "White ink cycle waiting time".
Step 3: Save the changes, pressing “File” and “Save”.
Related Articles
Deactivation of empty tanks UV Printer / Stefhany
Deactivation of empty tanks The primary cartridges are the tanks where the ink is deposited, generally located at the rear of the machine, each tank can hold one liter of ink, which is equivalent to one bottle. The primary cartridges have an alarm ...How to replace ink pump? / Stefhany
How to replace ink pump? Step 1：Unplug the ink pump power terminal and remove the 2 screws on the mounting bracket. As shown below: Step 2：Remove the ink pump and unplug the two ink tubes on the ink pump (be careful to cut off the ink path firstly to ...Issue with the chiller´s alarm, Test the alarm cable / Daniel
INTRODUCTION When there is a connection problem between the chiller alarm and the machine, the machine cuts but without power to the tube since the high voltage source is disabled. In the chiller the flow alarm and output ports In order to ...INK SUPPLY PROBLEMS (MAIN BOARD SHOWS "6") / Stefhany
INK SUPPLY PROBLEMS (MAIN BOARD SHOWS “6”) The number 6 on the motherboard indicates that one of the secondary ink tanks is empty, each secondary tank has a flow sensor that sends the necessary signal to activate the ink circulation in the system. ...Flow alarm indicator lights and Buzzer for chiller / Daniel
source: Teyuchiller.com