LOAD FACTORY PARAMETERS OR DEFAULT FOR RUIDA RDC6442 / Daniel

LOAD FACTORY PARAMETERS OR DEFAULT RUIDA RDC6442

 

To load the default configuration from the operation panel, follow these steps:

     1.  Press the  Z/U key  

    2.  With the direction arrows move and select the option “Set default para” and confirm with the enter key

      3. Use the direction arrows to enter the password HF8888 and confirm with the enter key

To change the factory parameters select "Set Factory para" and repeat the previous steps

• Related Articles

• CHANGE LANGUAGE IN RUIDA RDC6445 BOARD / Daniel

  To change the default language on the Ruida RDC6445 control panel, follow these steps 1. Press the menu button 2. When pressing menu, “user settings” appears selected, move to the last button “controller Settings” and press the enter button to ...

• Worktable movement problem when changing board RUIDA RDC6442 / DANIEL

  Problem of movement of the machine in the z axis, when changing the Ruida RDC6442C board the worktable does not move, The solution is to change the parameters, or load the vendor parameters to the machine Para cargar o cambiar los parámetros se debe ...

• Loading the rotary parameters from Lightburn software / Daniel

  To Load the file that has the parameters for the rotary attachment follow the next steps Check this video to check the procedure https://www.dropbox.com/s/7xy9j12d91w2az0/rotary%20parameters%20from%20lightburn.mp4?dl=0 Step 1 Go to Edit menu and ...

• How to change the screen mirror mode on the Ruida Operation Panel / Daniel

  How to change the screen mirror mode on the Ruida Operatio Panel  To change the screen mirror  mode on the operation panel, follow the next steps Step 1 Press the menu button and select the option "Controler Settin" and confirm with "enter" Step 2 ...

• ¿Cómo cargar los parámetros de fábrica de panel de operación Ruida RDC6442? / Daniel

  CARGAR PARAMETROS DE FABRICA O POR DEFECTO RUIDA RDC6442   Para cargar la configuración por defecto desde el panel de operación siga estos pasos:      1.  presiona la tecla Z/U       2.  Con las flechas de dirección muévase y  seleccione la opción ...