CHANGE LANGUAGE IN RUIDA RDC6445 BOARD / Daniel

To change the default language on the Ruida RDC6445 control panel, follow these steps

1. Press the menu button

2. When pressing menu, “user settings” appears selected, move to the last button “controller Settings” and press the enter button to confirm

3-  Enter the first option, "language +" and confirm with the enter button

4.    Select the language that you want to change and confirm with button enter

• Related Articles

• LOAD FACTORY PARAMETERS OR DEFAULT FOR RUIDA RDC6442 / Daniel

  LOAD FACTORY PARAMETERS OR DEFAULT RUIDA RDC6442   To load the default configuration from the operation panel, follow these steps:      1.  Press the  Z/U key       2.  With the direction arrows move and select the option “Set default para” and ...

• How to set the origin position in CO2 Machine - Ruida Board / Daniel

  How to set the origin position in CO2 Machine - Ruida Board  Go to process control bar  and change in position “Current position” There are 2 ways to cut or scan vector File or Bitmap File in RDworks, One way is doing in the RDworks Software directly ...

• CONNECT THE RUIDA MAIN BOARD TO A MAC COMPUTER WITH LIGHTBURN / Daniel

  To make the connection of our CO2 cutting and engraving equipment that has a Ruida controller Board and a Mac computer with the Lightburn program, it is done through the Ethernet connection First method: POINT-TO-POINT CONNECTION THROUGH A NETWORK ...

• Worktable movement problem when changing board RUIDA RDC6442 / DANIEL

  Problem of movement of the machine in the z axis, when changing the Ruida RDC6442C board the worktable does not move, The solution is to change the parameters, or load the vendor parameters to the machine Para cargar o cambiar los parámetros se debe ...

• How to change the screen mirror mode on the Ruida Operation Panel / Daniel

  How to change the screen mirror mode on the Ruida Operatio Panel  To change the screen mirror  mode on the operation panel, follow the next steps Step 1 Press the menu button and select the option "Controler Settin" and confirm with "enter" Step 2 ...