Worktable movement problem when changing board RUIDA RDC6442 / DANIEL
Problem
of movement of the machine in the z axis, when changing the Ruida RDC6442C
board the worktable does not move, The solution is to change the parameters, or
load the vendor parameters to the machine
Para cargar o cambiar los parámetros se debe ingresar a Menú File, opción “Vendor Settings”
Type password: RD8888
Download the vendor parameters from the next link,
https://www.dropbox.com/s/nc4qsty7wfmhii1/vendor%20settings%20dual.RDVSet?dl=0
Open and write to the machine
Default parameters RDC6442 board (a problem in the work table is not moving)
X-AXIS MOTOR
Y-AXIS MOTOR
WORKTABLE MOTOR
LASER TUBE
OTHER CONFIGURATION
TO SOLVE THE PROBLEM
LOAD THESE PARAMETERS TO THE MACHINE
X-AXIS MOTOR
Y-AXIS MOTOR
WORKTABLE MOTOR
LASER TUBE
OTHER CONFIGURATION
Related Articles
Worktable Problem - Autofocus Sensor On / Daniel
AutoFocus sensor problem. One of the frequent problems in a CO2 machine is the autofocus sensor, is the one that determines the movement and blocking of the work table and when activated it does not allow the table to move up, the very quick solution ...CHANGE LANGUAGE IN RUIDA RDC6445 BOARD / Daniel
To change the default language on the Ruida RDC6445 control panel, follow these steps 1. Press the menu button 2. When pressing menu, “user settings” appears selected, move to the last button “controller Settings” and press the enter button to ...CONNECT THE RUIDA MAIN BOARD TO A MAC COMPUTER WITH LIGHTBURN / Daniel
To make the connection of our CO2 cutting and engraving equipment that has a Ruida controller Board and a Mac computer with the Lightburn program, it is done through the Ethernet connection First method: POINT-TO-POINT CONNECTION THROUGH A NETWORK ...How to set the origin position in CO2 Machine - Ruida Board / Daniel
How to set the origin position in CO2 Machine - Ruida Board Go to process control bar and change in position “Current position” There are 2 ways to cut or scan vector File or Bitmap File in RDworks, One way is doing in the RDworks Software directly ...¿Cómo cambio el idioma a inglés de tarjeta Ruida RDC6445? / Daniel
Para cambiar el idioma que viene predeterminado en el panel de control de la Ruida RDC6445 sigue los siguientes pasos 1. Presione la tecla menú 2. Al presionar menú aparece seleccionado “user settings” baje hasta el último botón “ controler Settings” ...