Fiber Laser System
EZCAD2 SOFTWARE AND CONTROLLER CARD DRIVER INSTALLATION / DANIEL
EZCAD2 SOFTWARE INSTALLATION It is recommended that you disable antivirus software in advance, to avoid problems during software installation. SOFTWARE INSTALLATION Plug the Pendrive into the computer where you are going to install the software. Then ...
Instalación y configuración de la máquina Galvo S / Daniel
Despues de recibir la máquina marcadora Galvo, necesitas ensamblar la máquina, instalar el software en el computador y configurar los parámetros según la hoja de tabla de parametrización Sino tienes la carpeta en la memoria USB la puedes descargar ...
Red dot diode setting out of phase on Galvo E-series / Daniel
Red dot diode setting out of phase on Galvo E-series To perform the red dot adjustment on the galvo E-series that is physically out of phase, follow these steps First step Remove the 4 Allen screws that secure the head lead to the Lifting Mechanism ...
Perdida de potencia en el grabado con Máquina de grabado Galvo E-Series- Limpieza del lente f-Theta / Daniel
Perdida de potencia en el grabado con Máquina de grabado Galvo E-Series Cuando se tiene una perdida de potencia en el láser de Fibra de una Galvo, puede deberse a que tenemos el lente f-theta con impurezas. Para solucionar este inconveniente se ...
Galvo 30W Rotary Attachment connection / Daniel
Rotary Attachment connection to Galvo 30W machine In the following video you can see the procedure https://www.dropbox.com/s/gwx228r8r62pr6u/conexi%C3%B3n%20rotador%20galvo.mp4?dl=0 To connect the rotary to the Galvo E-Series laser machine, ...
¿Cómo hacer operaciónes con vectores en el programa EZCAD2?
Para realizar operaciones de vectores, tales como unión, intersección, Recortar. Se debe usar la herramienta PLASTIC, que se encuentra en el menú Modify del programa EZCAD2, se crean dos objetos para trabajar con ellos las operaciones Para soldar se ...