EZCAD2 SOFTWARE AND CONTROLLER CARD DRIVER INSTALLATION / DANIEL

EZCAD2 SOFTWARE AND CONTROLLER CARD DRIVER INSTALLATION / DANIEL


EZCAD2 SOFTWARE INSTALLATION 



It is recommended that you disable antivirus software in advance, to avoid problems during software installation.



SOFTWARE INSTALLATION

Plug the Pendrive into the computer where you are going to install the software. Then Copy Ezcad2.14.7 folder to the disk C, is recommended to copy to the root of disk C.  the path C:// The folder contains the software and driver




open the Ezcad2.14.7 folder  and select the EzCad2 file right click, select send to and left click, then select Desktop (create shortcut) left click



























You will see the icon on your computer desktop 



INSTALLING THE CONTROL CARD DRIVER

Turn on and connect the laser engraving machine to the computer using the USB cable,  windows will plug and play the driver, but the driver must install manually 





To install the driver manually Right click "My Computer", select "Properties" and "Device Manager" left click, as shown in the figure
















Choose "Other Devices" and you will see the option "USBLMCV2", right click to choose "Update USBLMCV2 Driver Software" as shown in figure



Select Browse my computer for driver software 





















Choose the path of the driver (C:// Ezcad2.14.7 ), include subfolders as shown in the figures







































Windows detected the driver in the folder, select install and the software driver begins to install

































When the driver installation is complete, you will see "Laser Mark Control Board V2 [USB]" in "Device Manager", as shown in the figures


1


    • Related Articles

    • Galvo S machine assembly and software installation / Daniel

      After received the galvo machine. you need to follow the steps to install the machine and the software installation in the computer to assembly You need a simple 2 steps Step 1 Install the lifting to the worktable tightening the 4 screws with an ...

    • 5 - RDworks software installation / Daniel

      To install the RDWorks Software follow the steps Step 1 Download the software Version 8.01.60 from this link (copy and paste) https://www.dropbox.com/sh/e3444th055hvq5c/AAAtZEqaCp3Of27V7OMog-w8a?dl=0 link of the version RDworks V 8.0.1.61 ...

    • Install Smartcarve software for RDXXXX-YM controller / Daniel

      To Install Smartcarve software for the machine follow the steps Step 1 Download the Smartcarve Software version 4.3.29 from this Link https://www.dropbox.com/sh/m1jouuqhcmu5tld/AACGQfsUv18cuJ30ONQ9nayCa?dl=0 Step 2 Disable the antivirus software Step ...

    • Instalación y configuración de la máquina Galvo S / Daniel

      Despues de recibir la máquina marcadora Galvo, necesitas ensamblar la máquina, instalar el software en el computador  y configurar los parámetros según la hoja de tabla de parametrización Sino tienes la carpeta en la memoria USB  la puedes descargar ...

    • RDCMarkvision installation and Camera Calibration with Ruida RDV6442G controller / Daniel

      Process of the SV300 Camera calibration in Versa machine with Ruida RDV6442G Or RDV6445G Controller. Follow these steps to perform the installation of the RDCMarvision software and calibrate the SV300 camera Step 1 Download and Install the software ...