How to change the Chiller CW5200 to a constant temperature mode? / Engineer David

How to change the Chiller CW5200 to a constant temperature mode? / Engineer David

Most of the time the chiller comes with the intelligent mode as default from the factory. This can cause problems in the summer times and winter seasons because the intelligent mode works with the ambient temperature.. that means that if the temperature is around 35°C it is going to work around 30°C, which is good for this temperature. But temperatures over 40°C are going to have problems.  The solution for this is to change the operating mode of the chiller to "Constant temperature mode", please check the next video and follow the instructions to change the operation mode of the chiller:



Thank you

    • Related Articles

    • CW5200 CHILLER TEMPERATURE CHANGE / Daniel

      In the following video you can see the temperature change procedure. https://youtu.be/yyn6Mgja32s Follow these steps to set the maximum and minimum temperature values for the chiller. Step 1 To access the settings, press the  y SET  buttons for 5 ...

    • Procedimiento para cargar los parámetros por defecto de la temperatura del chiller CW5200 / Daniel

      Procedimiento para cargar los parámetros por defecto  para el Chiller CW5200 Uno de los problemas que El Chiller  emite pitidos puede ser que el agua no esté circulando por el tubo pero que el paso del agua esté obstruido, Verifique que las mangueras ...

    • CWFL 3000 Chiller connections / Engineer David

      1. Get distilled water or half and half of the distilled water and antifreeze green if the temperatures on the site are under 40 F. Check the quantity with the label of the chiller. 2. The electrical connection needs to be like this:  As you can see ...

    • CWFL 4000 Chiller Connections / Engineer David

      1. Get distilled water or half and half of the distilled water and antifreeze green if the temperatures on the site are under 40 F. Check the quantity with the label of the chiller. 2. The electrical connection needs to be like this:  As you can see ...

    • Procedure to Restore Factory Setting for the Chiller CW5200 / Daniel

      One of the problems that  the chiller emits  beeps  can be that the water is not circulating through the tube but that the water passage is obstructed, Please check that the inlet and outlet hoses are not bent,  If still beeps another problem is the ...