Laser beam Alignment in Versa Dual Max Machine First of all, you need to level the machine and both the glass and RF laser tube, next step is to calibrate the mirrors, So in the next videos, we show you how to do it. Check the alignment in the ...
Here is the following video that shows how to connect the water hoses to the precitec laserhead. https://www.dropbox.com/s/ogp7dihtj4ijpa1/20201210_102702.mp4?dl=0 Remember that the Black hose that says "Side Blowing" is for the assistant air to ...
What does a focus lens do? Laser cutting and engraving machines use a laser beam with a diameter around one-quarter of an inch (240 thousandths). In order to achieve high-quality engraving and precise cutting, the laser beam uses a system of mirrors ...
Different positions of the lenses inside the barrel Focal Length of lenses Different positions of the lens in the barrel Position of the lens inside the barrel, Remember the convex part must be place facing the mirror, flat part to the material ...