1- Easy Machine and Worktable Leveling / Daniel

1- Easy Machine and Worktable Leveling / Daniel

To leveling the machine and the worktable  follow the next videos

To place Knife blades and honey comb

https://youtu.be/JrrI6uHG49o


To level the machine

https://youtu.be/1N5zerEiXuE



To level the worktable

https://youtu.be/xj9Kzh8Qhkk




    • Related Articles

    • Worktable movement problem when changing board RUIDA RDC6442 / DANIEL

      Problem of movement of the machine in the z axis, when changing the Ruida RDC6442C board the worktable does not move, The solution is to change the parameters, or load the vendor parameters to the machine Para cargar o cambiar los parámetros se debe ...
    • Worktable Problem - Autofocus Sensor On / Daniel

      AutoFocus sensor problem. One of the frequent problems in a CO2 machine is the autofocus sensor, is the one that determines the movement and blocking of the work table and when activated it does not allow the table to move up, the very quick solution ...
    • 3 - Easy CO2 Auxiliary Equipment connection / Daniel

      To connect the auxiliary equipment of a CO2 machine follow the next videos Exhaust fan connection https://youtu.be/5rzzkRV7fWA?list=PLXWt--vtyu_xh-fNWXevHN537tsZUN3LP compressor connection ...
    • 4- Easy CO2 Mirrors Calibration CO2 Machine / Daniel

      First of all, you need to level the machine and the laser tube, next step is to check the alignments of the laser beam So in the next videos, we show you how to do it. Pulse in the first mirror https://youtu.be/0xBg7ZNLHZY Try to get the two pulses ...
    • How to change the limit distance in the z axis of the Worktable? / Daniel

      To change the maximum travel of the worktable   From RDWorks software:   Open the program and enter the File menu after clicking on Vendor Settings, enter the password RD8888, click on the “Read” button, then click on motor, then click on the z axis ...