Power loss in engraving with Galvo E-Series Engraver machine - f-theta lens cleaning / Daniel
Power loss in engraving with Galvo E-Series engraver machine - f-theta
lens cleaning
When there is a loss of
power in the Fiber laser of a Galvo, it may be because we have the f-theta lens
with impurities. To solve this problem, it is cleaned with a lens cleaning
wipe.
Related Articles
Perdida de potencia en el grabado con Máquina de grabado Galvo E-Series- Limpieza del lente f-Theta / Daniel
Perdida de potencia en el grabado con Máquina de grabado Galvo E-Series Cuando se tiene una perdida de potencia en el láser de Fibra de una Galvo, puede deberse a que tenemos el lente f-theta con impurezas. Para solucionar este inconveniente se ...Cleaning the mirrors on a CO2 laser engraving and cutting machine / Daniel
In the following video you can watch the procedure of changing or cleaning the mirror of a CO2 machine https://www.youtube.com/watch?v=pxIulxX5udA To clean the mirrors of a CO2 machine, follow these steps: Step 1 Identify the safety ring that ...Ajuste del Red dot desfasado en la Galvo E-series / Daniel
Ajuste del Red Dot en la Galvo E-series Para realizar el ajuste del red dot en la galvo E-series que esta desfasado físicamente, siga estos pasos Primer paso Retire los 4 tornillos medianos allen que aseguran el cabezal al pedestal Segundo paso ...Installing the lens in a CO2 Star Machine / Daniel
Different positions of the lenses inside the barrel Focal Length of lenses Different positions of the lens in the barrel Position of the lens inside the barrel, Remember the convex part must be place facing the mirror, flat part to the material ...Galvo S machine assembly and software installation / Daniel
After received the galvo machine. you need to follow the steps to install the machine and the software installation in the computer to assembly You need a simple 2 steps Step 1 Install the lifting to the worktable tightening the 4 screws with an ...