5 - RDworks software installation / Daniel
To install the RDWorks Software follow the steps
Step 1
Download the software Version 8.01.60 from this link (copy and paste)
link of the version RDworks V 8.0.1.61
Link of the version RDworks V 8.0.1.63
Link of the New version RDworks V 8.0.1.64
Step 2
Disable the antivirus and windows defender
Step 3
Install the software and driver of the controller, change the origin and units
Step 4
Plug the USB cable into the computer port and machine port and check in the device manager the driver is installed also one port must be assigned a COM for the USB Cable
go to search bar and type Device, then clic on the icon
Step 5
open RDworks and test the comunication port In Devices untill get "Port Test Success"
if you need to learn how to use the RDworks software these videos can help you
Invitation card cutting, layer Parameter, preview and download the file
RDWorks dimensions, coordinates, and processing modes.
Related Articles
5 - Instalación software RDworks / Daniel
Para instalar el programa RDworks siga los siguientes pasos PASO 1 descargue el programa versión 8.01.60 de este enlace https://www.dropbox.com/sh/e3444th055hvq5c/AAAtZEqaCp3Of27V7OMog-w8a?dl=0 enlace de la version RDworks V 8.0.1.61 ...Solve the problem with the installation of RdWorks, copy the portable version to the disk C / Daniel
To solve the problem with the installation of RDWorks software, you have to copy the portable version of the software in the root of disk C, then install the software again First, Download the last versión of RDWorks from here ...How to change the units from mm to inches in Rdworks software? / Daniel
To change the units from mm to inches in Rdworks software follow this steps Step 1 Go to Config menu /file para Settings/ ( Rdworks Old version) Or Config Menu / System setting / Import-Export (Rdworks New Version) Step 2 Change DXF unit, Unit ...Install Smartcarve software for RDXXXX-YM controller / Daniel
To Install Smartcarve software for the machine follow the steps Step 1 Download the Smartcarve Software version 4.3.29 from this Link https://www.dropbox.com/sh/m1jouuqhcmu5tld/AACGQfsUv18cuJ30ONQ9nayCa?dl=0 Step 2 Disable the antivirus software Step ...RDworks Ethernet and Wifi PC Connection / Daniel
CONNECTION THROUGH A WIRELESS ROUTER AND ETHERNET CABLE For this connection, you need a wireless router that allows you to route the computer and the Ethernet connection of the Ruida board STEP 1 Connect the computer to the router through the ...