In the next video you can see the procedure https://youtu.be/IjSVHo0gBU4 To check the status of the laser tube follows the next steps: Step 1 Place a piece of acrylic in front of the tube. Step 2 Set the laser Max Power on the machine at 50% Step 3 ...
Laser beam Alignment in Versa Dual Max Machine First of all, you need to level the machine and both the glass and RF laser tube, next step is to calibrate the mirrors, So in the next videos, we show you how to do it. Check the alignment in the ...
¿Qué hacer si no hay salida láser del tubo? En el siguiente video puede ver el procedimiento para revisar si no hay salida láser en el tubo https://youtu.be/ISZg6fgLD6U 1- revise que el chiller (refrigerador) esté encendido sin alarmas 2. revise el ...
To see how the calibration is, we must observe that the mark of the laser beam is in the center of the hole in the laser head, if the two marks overlap but are above the center, it means that the height of the tube is above of the height of the laser ...
Next, you will find an explanation on how to adjust the mirror screws to perform a successful calibration of the laser beam https://www.youtube.com/watch?v=uScCkIyOl4o&t=5s The screws 1, 2 and 3 of the first and second mirrors can be moved in two ...