CONNECTING THE ROTARY ATTACHMENT VIDEO AND PARAMETERS / Stefhany

• Related Articles

• Loading the rotary parameters from Lightburn software / Daniel

  To Load the file that has the parameters for the rotary attachment follow the next steps Check this video to check the procedure https://www.dropbox.com/s/7xy9j12d91w2az0/rotary%20parameters%20from%20lightburn.mp4?dl=0 Step 1 Go to Edit menu and ...

• CO2 Versa Rotary Attachment Configuration: 4-Wheel Rim Drive Rotary and Three Jaw Chuck rotary Models / Daniel

  CO2 Machine Rotary Attachment Configuration: 4-Wheel Rim Drive Rotary and Three Jaw Chuck rotary Models   The Rotary Attachment Configuration: (4-Wheel Rim Drive Rotary and Three Jaw Chuck rotary) receive a signal from the Y axis, generating the ...

• Galvo 30W Rotary Attachment connection / Daniel

  Rotary Attachment connection to Galvo 30W machine   In the following video you can see the procedure https://www.dropbox.com/s/gwx228r8r62pr6u/conexi%C3%B3n%20rotador%20galvo.mp4?dl=0     To connect the rotary to the Galvo E-Series laser machine, ...

• Connect the connection kit for the Rotaty Attachment in the machine / Daniel

  To connect the kit sent by the factory for the machines and to be able to adapt a rotating accessory the following steps must be followed Step 1 Identify the 3-pin male terminal, the two-position switch, and the wire with 3 black, brown, and blue ...

• LOAD FACTORY PARAMETERS OR DEFAULT FOR RUIDA RDC6442 / Daniel

  LOAD FACTORY PARAMETERS OR DEFAULT RUIDA RDC6442   To load the default configuration from the operation panel, follow these steps:      1.  Press the  Z/U key       2.  With the direction arrows move and select the option “Set default para” and ...